European Shower Door in Bathrooms

Mar 28th

European shower door – A fast and cheap way to give your bathroom an upgraded look is with new shower doors. Installing shower doors can be done in a day, using basic home repair skills and tools. There are many styles to choose from and with the right choice and careful installation; you will turn your bathroom from boring to beautiful. Measure the length of the tub, wall to wall, with your tape measure placed on the center of the tub cap. Subtract 3/16 inches from this measurement. Transfer this measurement to the bottom track and cut it in size. Smooth ends with a file.

Stylish European Shower Door
Stylish European Shower Door

Ideas for install European shower door in bathrooms place and center the bottom groove on the tub cover, leaving equal space at each end of the wall ducts. Tape the track to the bathtub to hold it in place and make some pencil marks on each end as a reference in case of traces slipping during installation. Hold each wall channel one at a time against the wall so that the bottom of the channel fits into the bottom track without any spaces. Use a water pass and make sure the wall channel is loose. Make a mark through each screw hole on the wall with a pencil. Repeat this process with the second wall channel.

12 Photos Gallery of: European Shower Door in Bathrooms

Image of: Stylish European Shower Door
Image of: New European Shower Door Ideas
Image of: Great European Shower Door
Image of: Good European Shower Door
Image of: Good European Shower Door Ideas
Image of: European Shower Door Style
Image of: European Shower Door Design
Image of: Contemporary European Shower Door
Image of: Best European Shower Door
Image of: Best European Shower Door Ideas
Image of: Awesome European Shower Door
Image of: Amazing European Shower Door
 

Then to install European shower door in bathrooms, make a small buckle on each pen label with a rider tool. This will help keep the drill from wandering when drilling holes.  Apply a string of sealant to the outer edge of the bottom side of the lower track. Place the groove on the bathtub edge and press it in place, using your reference marks as a guide. Put a small amount of sealant at each end where the groove meets the wall. Slide each wall channel into the base slot and raise the holes in the channels with those in the walls. Use a screwdriver and securely attach the ducts using the supplied screws. Install the bumper to the top and bottom of each channel with screws.