Half glass shower door for bathtub are an attractive complement to all bathrooms, but it may come a while when they have to be removed. Whether you prefer shower drapes or simply want to replace existing doors with a new set, this is a do-it-yourself project that can be easily done in a single afternoon. Even removing the doors is not difficult, should not damage the bathtub any more than necessary during removal. If you have a fiberglass tub or tub surround, small screw holes will remain there the shower door the grooves attach to the bathtub. If you remodel your bathroom or change fixtures and need more swing rooms, you may be puzzled when it comes to removing the shower door. Not as complicated as it seems, you can remove your shower door for a few minutes with a little angled grease.
How to remove half glass shower door for bathtub, before you know the word, you have removed it and move on to the next step in the project. Look inside the top of your shower. You see that the shower door hangs on a reel, much like a wardrobe bi fold door. Grab the front door with one hand on each side, halfway up from the bottom of the door. Lift the door half a inch and pull it towards you. This will take the roll of the lane and release the shower door from the frame.
12 Photos Gallery of: Half Glass Shower Door for Bathtub Ideas
Then to remove half glass shower door for bathtub, carefully lower the cover, avoid the bottom of the shower wall, and set it aside where it will not get over. Remove the other side of your shower door in the same way. Tap the top rail with the heel of your hand. It rests on the side marks unbound and will loosen easily. Locate the two screws on each side of the rail and the lower rail and remove. Rip the pieces loose; At this point they are only held by silicone and will loosen with a little pressure.