Repair Sears Garage Door Opener

Sep 19th

Sears Garage Door Opener – When you have a Sears Craftsman garage door opener, you can program it to work with the remote controls of your garage opener. Garage remote controls make the operation of your garage easy. They prevent you from going to the door and pressing the button on the wall. You can easily program the Craftsman garage door opener to work with new remote controls. You can also reprogram the opener if your old remote control stops working. There are many different models of Craftsman garage door openers.

Sears Garage Door Opener Red
Sears Garage Door Opener Red

This article gives you instructions for the model numbers: 139.53225RT, 139.53325SRT, 139.53425SRT, 139.53628SRT, 139.53629SRT, 139.53635SRT, 139.53637SRT, 139.53824SRT and the Craftsman 971LM Liftmaster Chamberlain. Locate the “Learn” button on the back of the sears garage door opener. This is a large box that is attached to the inside of your garage and that causes your door to go up or down. Press and release the “Learn” button. The light that is on the side of it will light for about 30 seconds. Wait until it goes out. Press and hold the top button on your garage’s remote control. If you have one that has three buttons, choose any of them.

12 Photos Gallery of: Repair Sears Garage Door Opener

Image of: Sears Garage Door Opener Red
Image of: Sears Garage Door Opener Popular
Image of: Sears Garage Door Opener Old
Image of: Sears Garage Door Opener Modern
Image of: Sears Garage Door Opener Models
Image of: Sears Garage Door Opener Kits
Image of: Sears Garage Door Opener Innovation
Image of: Sears Garage Door Opener Ideas
Image of: Sears Garage Door Opener Design
Image of: Sears Garage Door Opener Box
Image of: Sears Garage Door Opener Black
Image of: Sears Garage Door Opener Remote
 

Locate the “SRT” button on the back of your garage door opener. Press and hold the “SRT” button. This must be done while you are pressing the remote control button on the garage door. Wait for the indicator light on the sears garage door opener to flash. This may take a few seconds. When it does, it will be an indicator that your garage door opener has been programmed to operate with the remote control. Locate the “Learn” button on the back of the garage door opener. This is a large box that is attached to the inside of your garage and that causes your door to go up or down. Press and release the “Learn” button. The light that is on the side of it will light for about 30 seconds. Wait until it goes out.

More reader came from this term: repair sears garage door opener.